HPE 562SFP+ 10 Gigabit

689.00 EUR

Key features

No firmware updates required - Less management and downtime
Hardware acceleration TCP/IP/UDP stateless intelligent offloads
Industry-leading throughput and latency performance
Up to 40 Gb/s bi-directional near line rate throughput
Low profile design shipping with standard height and low-profile brackets
On chip temperature monitor
Integrated PHY and MAC
Support for Preboot Execution Environment (PXE)
Supports SR-IOV (Requires server FW, SW and OS support)
PXE, jumbo frames, checksum and segmentation offload, IPv6 and RSS
Standard server operating system support
Field replaceable and upgradeable
IEEE 1588 (Time synchronization)
Standard NC series option kit warranty, support, services

Throughput- Theoretical bandwidth

This adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks

802.1Q VLANs

IEEE 802.1Q Virtual Local Area Network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance
VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance

Checksum and segmentation offload

Normally the TCP checksum is computed by the protocol stack. Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead
The technique is also called TCP Segmentation Offload (TSO) when applied to TCP, or Generic Segmentation Offload (GSO)

Configuration utilities

This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming
This includes a patented teaming GUI for Microsoft Windows operating systems
Additionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations

DPDK

This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments

HPE Sea Of Sensors 3D

Support for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity - heat - across the server
When temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage
A significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling

IPv6

IPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing

Jumbo frames

This adapter supports jumbo frames (Also known as extended frames), permitting up to a 9,000 byte (KB) transmission unit (MTU) when running Ethernet I/O traffic
This is over five times the size of a standard 1500- byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and greater CPU utilization
These attributes are particularly useful for database transfer and tape backup operations

Message Signaled Interrupt (Extended) (MSI-X)

Message signaled interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs/cores

Network adapter teaming

This adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs

Optimized for virtualization

I/O virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads

PCI express interface

This adapter is designed with an eight lane (x8) PCI express bus based on the PCIe 3.0 standard. The adapter is backward compatible with four lane (x4) PCI express, automatically auto-sensing between x8 and x4 slots

Preboot Execution Environment (PXE)

Support for PXE enables automatic deployment of computing resources remotely from anywhere
It allows a new or existing server to boot over the network and download software, including the operating system, from a management/ deployment server at another location on the network
Additionally, PXE enables decentralized software distribution and remote troubleshooting and repairs

Receive Side Scaling (RSS)

RSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors
RSS enables packet receive-processing to scale with the number of available processors

TCP/UDP/IP

For overall improved system response, this adapter supports standard TCP/IP offloading techniques including: TCP/IP, UDP Checksum Offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter
Large Send Offload (LSO) or TSO allows the TCP segmentation to be handled by the adapter rather than the CPU

Precision Time Protocol (IEEE 1588 PTP)

Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems

top

Network management

Feature

Description

LED indicators

LED indicators show link integrity and network activity for easy troubleshooting

Management support

This adapter ships with agents that can be managed from HPE Systems Insight Manager or other management application that support SNMP

Quantity

Vat Exluded!All prices are without VAT

← Back to Network

Other Customers also buy:

{"id":6650745061545,"title":"HPE 562SFP+ 10 Gigabit","handle":"hpe-562sfp-10-gigabit","description":"\u003cstrong\u003eKey features\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNo firmware updates required - Less management and downtime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardware acceleration TCP\/IP\/UDP stateless intelligent offloads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndustry-leading throughput and latency performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 40 Gb\/s bi-directional near line rate throughput\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow profile design shipping with standard height and low-profile brackets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOn chip temperature monitor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntegrated PHY and MAC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for Preboot Execution Environment (PXE)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports SR-IOV (Requires server FW, SW and OS support)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePXE, jumbo frames, checksum and segmentation offload, IPv6 and RSS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard server operating system support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eField replaceable and upgradeable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 1588 (Time synchronization)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard NC series option kit warranty, support, services\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThroughput- Theoretical bandwidth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter delivers 20 Gb\/s bi-directional Ethernet transfer rate per port (40 Gb\/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e802.1Q VLANs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 802.1Q Virtual Local Area Network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChecksum and segmentation offload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNormally the TCP checksum is computed by the protocol stack. Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe technique is also called TCP Segmentation Offload (TSO) when applied to TCP, or Generic Segmentation Offload (GSO)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration utilities\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis includes a patented teaming GUI for Microsoft Windows operating systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDPDK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHPE Sea Of Sensors 3D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity - heat - across the server\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIPv6\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJumbo frames\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter supports jumbo frames (Also known as extended frames), permitting up to a 9,000 byte (KB) transmission unit (MTU) when running Ethernet I\/O traffic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis is over five times the size of a standard 1500- byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and greater CPU utilization\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThese attributes are particularly useful for database transfer and tape backup operations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMessage Signaled Interrupt (Extended) (MSI-X)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMessage signaled interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs\/cores\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork adapter teaming\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized for virtualization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eI\/O virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePCI express interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter is designed with an eight lane (x8) PCI express bus based on the PCIe 3.0 standard. The adapter is backward compatible with four lane (x4) PCI express, automatically auto-sensing between x8 and x4 slots\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreboot Execution Environment (PXE)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for PXE enables automatic deployment of computing resources remotely from anywhere\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIt allows a new or existing server to boot over the network and download software, including the operating system, from a management\/ deployment server at another location on the network\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, PXE enables decentralized software distribution and remote troubleshooting and repairs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReceive Side Scaling (RSS)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRSS enables packet receive-processing to scale with the number of available processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTCP\/UDP\/IP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFor overall improved system response, this adapter supports standard TCP\/IP offloading techniques including: TCP\/IP, UDP Checksum Offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarge Send Offload (LSO) or TSO allows the TCP segmentation to be handled by the adapter rather than the CPU\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Time Protocol (IEEE 1588 PTP)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSynchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems\u003c\/p\u003e\n\u003cp\u003etop\u003c\/p\u003e\n\u003ch2\u003eNetwork management\u003c\/h2\u003e\n\u003cp\u003eFeature\u003c\/p\u003e\n\u003cp\u003eDescription\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLED indicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLED indicators show link integrity and network activity for easy troubleshooting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManagement support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter ships with agents that can be managed from HPE Systems Insight Manager or other management application that support SNMP\u003c\/p\u003e","published_at":"2021-04-02T19:35:56+03:00","created_at":"2021-04-02T19:30:21+03:00","vendor":"HPE","type":"Managed Switch","tags":[],"price":68900,"price_min":68900,"price_max":68900,"available":true,"price_varies":false,"compare_at_price":68900,"compare_at_price_min":68900,"compare_at_price_max":68900,"compare_at_price_varies":false,"variants":[{"id":39589142331561,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2M24M29","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HPE 562SFP+ 10 Gigabit","public_title":null,"options":["Default Title"],"price":68900,"weight":8000,"compare_at_price":68900,"inventory_management":"shopify","barcode":"0887758383490","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053","\/\/www.ultiwerk.com\/cdn\/shop\/products\/1033784108.jpg?v=1617381058"],"featured_image":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053","options":["Title"],"media":[{"alt":null,"id":21488866721961,"position":1,"preview_image":{"aspect_ratio":1.05,"height":476,"width":500,"src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053"},"aspect_ratio":1.05,"height":476,"media_type":"image","src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053","width":500},{"alt":null,"id":21488866918569,"position":2,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/1033784108.jpg?v=1617381058"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/1033784108.jpg?v=1617381058","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eKey features\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNo firmware updates required - Less management and downtime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardware acceleration TCP\/IP\/UDP stateless intelligent offloads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndustry-leading throughput and latency performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 40 Gb\/s bi-directional near line rate throughput\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow profile design shipping with standard height and low-profile brackets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOn chip temperature monitor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntegrated PHY and MAC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for Preboot Execution Environment (PXE)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports SR-IOV (Requires server FW, SW and OS support)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePXE, jumbo frames, checksum and segmentation offload, IPv6 and RSS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard server operating system support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eField replaceable and upgradeable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 1588 (Time synchronization)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard NC series option kit warranty, support, services\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThroughput- Theoretical bandwidth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter delivers 20 Gb\/s bi-directional Ethernet transfer rate per port (40 Gb\/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e802.1Q VLANs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 802.1Q Virtual Local Area Network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChecksum and segmentation offload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNormally the TCP checksum is computed by the protocol stack. Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe technique is also called TCP Segmentation Offload (TSO) when applied to TCP, or Generic Segmentation Offload (GSO)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration utilities\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis includes a patented teaming GUI for Microsoft Windows operating systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDPDK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHPE Sea Of Sensors 3D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity - heat - across the server\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIPv6\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJumbo frames\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter supports jumbo frames (Also known as extended frames), permitting up to a 9,000 byte (KB) transmission unit (MTU) when running Ethernet I\/O traffic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis is over five times the size of a standard 1500- byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and greater CPU utilization\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThese attributes are particularly useful for database transfer and tape backup operations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMessage Signaled Interrupt (Extended) (MSI-X)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMessage signaled interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs\/cores\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork adapter teaming\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized for virtualization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eI\/O virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePCI express interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter is designed with an eight lane (x8) PCI express bus based on the PCIe 3.0 standard. The adapter is backward compatible with four lane (x4) PCI express, automatically auto-sensing between x8 and x4 slots\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreboot Execution Environment (PXE)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for PXE enables automatic deployment of computing resources remotely from anywhere\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIt allows a new or existing server to boot over the network and download software, including the operating system, from a management\/ deployment server at another location on the network\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, PXE enables decentralized software distribution and remote troubleshooting and repairs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReceive Side Scaling (RSS)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRSS enables packet receive-processing to scale with the number of available processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTCP\/UDP\/IP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFor overall improved system response, this adapter supports standard TCP\/IP offloading techniques including: TCP\/IP, UDP Checksum Offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarge Send Offload (LSO) or TSO allows the TCP segmentation to be handled by the adapter rather than the CPU\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Time Protocol (IEEE 1588 PTP)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSynchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems\u003c\/p\u003e\n\u003cp\u003etop\u003c\/p\u003e\n\u003ch2\u003eNetwork management\u003c\/h2\u003e\n\u003cp\u003eFeature\u003c\/p\u003e\n\u003cp\u003eDescription\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLED indicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLED indicators show link integrity and network activity for easy troubleshooting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManagement support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter ships with agents that can be managed from HPE Systems Insight Manager or other management application that support SNMP\u003c\/p\u003e"}
Intel X550-T1 10 Gigabi

Translation missing: en.products.product.regular_price 325.00 EUR
{"id":6650745061545,"title":"HPE 562SFP+ 10 Gigabit","handle":"hpe-562sfp-10-gigabit","description":"\u003cstrong\u003eKey features\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNo firmware updates required - Less management and downtime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardware acceleration TCP\/IP\/UDP stateless intelligent offloads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndustry-leading throughput and latency performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 40 Gb\/s bi-directional near line rate throughput\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow profile design shipping with standard height and low-profile brackets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOn chip temperature monitor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntegrated PHY and MAC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for Preboot Execution Environment (PXE)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports SR-IOV (Requires server FW, SW and OS support)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePXE, jumbo frames, checksum and segmentation offload, IPv6 and RSS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard server operating system support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eField replaceable and upgradeable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 1588 (Time synchronization)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard NC series option kit warranty, support, services\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThroughput- Theoretical bandwidth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter delivers 20 Gb\/s bi-directional Ethernet transfer rate per port (40 Gb\/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e802.1Q VLANs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 802.1Q Virtual Local Area Network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChecksum and segmentation offload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNormally the TCP checksum is computed by the protocol stack. Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe technique is also called TCP Segmentation Offload (TSO) when applied to TCP, or Generic Segmentation Offload (GSO)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration utilities\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis includes a patented teaming GUI for Microsoft Windows operating systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDPDK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHPE Sea Of Sensors 3D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity - heat - across the server\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIPv6\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJumbo frames\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter supports jumbo frames (Also known as extended frames), permitting up to a 9,000 byte (KB) transmission unit (MTU) when running Ethernet I\/O traffic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis is over five times the size of a standard 1500- byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and greater CPU utilization\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThese attributes are particularly useful for database transfer and tape backup operations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMessage Signaled Interrupt (Extended) (MSI-X)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMessage signaled interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs\/cores\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork adapter teaming\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized for virtualization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eI\/O virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePCI express interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter is designed with an eight lane (x8) PCI express bus based on the PCIe 3.0 standard. The adapter is backward compatible with four lane (x4) PCI express, automatically auto-sensing between x8 and x4 slots\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreboot Execution Environment (PXE)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for PXE enables automatic deployment of computing resources remotely from anywhere\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIt allows a new or existing server to boot over the network and download software, including the operating system, from a management\/ deployment server at another location on the network\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, PXE enables decentralized software distribution and remote troubleshooting and repairs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReceive Side Scaling (RSS)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRSS enables packet receive-processing to scale with the number of available processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTCP\/UDP\/IP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFor overall improved system response, this adapter supports standard TCP\/IP offloading techniques including: TCP\/IP, UDP Checksum Offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarge Send Offload (LSO) or TSO allows the TCP segmentation to be handled by the adapter rather than the CPU\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Time Protocol (IEEE 1588 PTP)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSynchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems\u003c\/p\u003e\n\u003cp\u003etop\u003c\/p\u003e\n\u003ch2\u003eNetwork management\u003c\/h2\u003e\n\u003cp\u003eFeature\u003c\/p\u003e\n\u003cp\u003eDescription\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLED indicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLED indicators show link integrity and network activity for easy troubleshooting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManagement support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter ships with agents that can be managed from HPE Systems Insight Manager or other management application that support SNMP\u003c\/p\u003e","published_at":"2021-04-02T19:35:56+03:00","created_at":"2021-04-02T19:30:21+03:00","vendor":"HPE","type":"Managed Switch","tags":[],"price":68900,"price_min":68900,"price_max":68900,"available":true,"price_varies":false,"compare_at_price":68900,"compare_at_price_min":68900,"compare_at_price_max":68900,"compare_at_price_varies":false,"variants":[{"id":39589142331561,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2M24M29","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HPE 562SFP+ 10 Gigabit","public_title":null,"options":["Default Title"],"price":68900,"weight":8000,"compare_at_price":68900,"inventory_management":"shopify","barcode":"0887758383490","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053","\/\/www.ultiwerk.com\/cdn\/shop\/products\/1033784108.jpg?v=1617381058"],"featured_image":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053","options":["Title"],"media":[{"alt":null,"id":21488866721961,"position":1,"preview_image":{"aspect_ratio":1.05,"height":476,"width":500,"src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053"},"aspect_ratio":1.05,"height":476,"media_type":"image","src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/31549314_1066174851.jpg?v=1617381053","width":500},{"alt":null,"id":21488866918569,"position":2,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/1033784108.jpg?v=1617381058"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"\/\/www.ultiwerk.com\/cdn\/shop\/products\/1033784108.jpg?v=1617381058","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eKey features\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNo firmware updates required - Less management and downtime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardware acceleration TCP\/IP\/UDP stateless intelligent offloads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndustry-leading throughput and latency performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 40 Gb\/s bi-directional near line rate throughput\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow profile design shipping with standard height and low-profile brackets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOn chip temperature monitor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntegrated PHY and MAC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for Preboot Execution Environment (PXE)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports SR-IOV (Requires server FW, SW and OS support)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePXE, jumbo frames, checksum and segmentation offload, IPv6 and RSS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard server operating system support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eField replaceable and upgradeable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 1588 (Time synchronization)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard NC series option kit warranty, support, services\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThroughput- Theoretical bandwidth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter delivers 20 Gb\/s bi-directional Ethernet transfer rate per port (40 Gb\/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e802.1Q VLANs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIEEE 802.1Q Virtual Local Area Network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChecksum and segmentation offload\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNormally the TCP checksum is computed by the protocol stack. Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe technique is also called TCP Segmentation Offload (TSO) when applied to TCP, or Generic Segmentation Offload (GSO)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration utilities\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis includes a patented teaming GUI for Microsoft Windows operating systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDPDK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHPE Sea Of Sensors 3D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity - heat - across the server\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIPv6\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJumbo frames\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis adapter supports jumbo frames (Also known as extended frames), permitting up to a 9,000 byte (KB) transmission unit (MTU) when running Ethernet I\/O traffic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis is over five times the size of a standard 1500- byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and greater CPU utilization\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThese attributes are particularly useful for database transfer and tape backup operations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMessage Signaled Interrupt (Extended) (MSI-X)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMessage signaled interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs\/cores\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork adapter teaming\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized for virtualization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eI\/O virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePCI express interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter is designed with an eight lane (x8) PCI express bus based on the PCIe 3.0 standard. The adapter is backward compatible with four lane (x4) PCI express, automatically auto-sensing between x8 and x4 slots\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreboot Execution Environment (PXE)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupport for PXE enables automatic deployment of computing resources remotely from anywhere\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIt allows a new or existing server to boot over the network and download software, including the operating system, from a management\/ deployment server at another location on the network\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdditionally, PXE enables decentralized software distribution and remote troubleshooting and repairs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReceive Side Scaling (RSS)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRSS enables packet receive-processing to scale with the number of available processors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTCP\/UDP\/IP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFor overall improved system response, this adapter supports standard TCP\/IP offloading techniques including: TCP\/IP, UDP Checksum Offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarge Send Offload (LSO) or TSO allows the TCP segmentation to be handled by the adapter rather than the CPU\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Time Protocol (IEEE 1588 PTP)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSynchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems\u003c\/p\u003e\n\u003cp\u003etop\u003c\/p\u003e\n\u003ch2\u003eNetwork management\u003c\/h2\u003e\n\u003cp\u003eFeature\u003c\/p\u003e\n\u003cp\u003eDescription\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLED indicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLED indicators show link integrity and network activity for easy troubleshooting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManagement support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter ships with agents that can be managed from HPE Systems Insight Manager or other management application that support SNMP\u003c\/p\u003e"}
Cisco Catalyst 2960X-24PS-L

Translation missing: en.products.product.regular_price 3,000.00 EUR

Network management

Login

Reset your password

Create Account